Financial & Cost Control in Railway Workshops
1. Introduction & Rationale
Railway workshops (for overhauls, repairs, manufacturing components etc.) are major cost centres in Indian Railways. Much of the capital and revenue expenditure is channelled through them.
Financial control ensures that scarce funds are used prudently, avoiding waste, leakages, and overruns. Cost control ensures that each activity is done at minimal cost consistent with quality, time, and safety.
In Indian Railways, the Rolling Stock Code (along with related Finance, Stores, Works, and Mechanical codes) lays down norms, classifications, procedures, and costing systems.
The dual objective: (a) maintain financial propriety, and (b) generate accurate cost data for performance monitoring, internal accountability, and managerial decisions (like repair vs replace, outsourcing, modernization).
2. Components of Financial Control
To exercise financial control in a workshop, the following key steps / machinery are used:
Thus, financial control is both procedural (sanction, vetting, review) and preventive (avoiding uncontrolled expenditures).
3. Costing in Workshops
Costing is more technical: how the cost of jobs, repairs, overhauls, component manufacture, etc., is allocated, attributed, and reconciled. The Rolling Stock Code and workshop accounts manuals define the detailed cost elements.
3.1 Elements of Cost
Costs in workshops can broadly be divided into:
Material cost — direct materials issued to jobs (from stores or direct purchase).
Labour cost (direct labour) — wages, overtime etc. of workers directly engaged in the job/repair.
On costs / Overheads — expenditures not directly allocable to jobs, which are apportioned via cost allocation methods. These are further subdivided into:
Shop On Cost — overheads that can be allocated to a shop (or cost centre) fairly directly (e.g. power, gas, shop consumables like oils, small tools, apprentices’ cost in that shop)
General On Cost — overheads common to many shops and not allocable to any one shop (e.g. freight charges, power for common lighting, yard cranes, lorries, etc.)
Proforma On Cost — the residual overheads such as administrative costs, establishment costs at HQ, depreciation, pension liabilities, contributions, etc., which would be included in full commercial costing though not always in direct workshop charges.
Thus, the total cost of a job = material cost + labour cost + appropriate share of on costs.
Workshop accounts maintain Workshop Manufacturing Suspense (WMS) accounts to accumulate labour, materials, and overheads until they are cleared into appropriate final cost accounts.
3.2 Types of Costing Systems
Workshops may adopt different costing systems depending on the nature of work:
Job Costing System — for distinct jobs or repair orders (e.g. POH of a particular coach)
Process Costing System — for processes where output is continuous (e.g. foundry, metal casting)
Batch Costing — for manufacturing items in batches (shop-manufactured components)
Revised Costing System / Unit Repair Cost (URC) — used particularly in loco workshops, where POH cost is grouped (Group A, B, C) and unit-wise costing is done for standardization.
Under revised costing, the cost of overhaul is broken into scheduled repairs (Group A), condition-basis replacements (Group B), and high-value items replacements (Group C).
3.3 Apportionment & Allocation Methods
Overhead allocation may use labour hours, machine hours, or material usage as basis for apportionment.
Route cards, work orders, and job cards document the labour/machine usage for each job, facilitating allocation.
Standards / norms: workshops often have standard costs / norms for material, labour, wastage etc., used as benchmarks. Variance analysis (actual vs standard) helps identify inefficiencies.
3.4 Reconciliation & Cost Statements
Monthly, quarterly and annual cost statements are prepared. These compare actual cost, standard cost, and previous year cost.
Variance analysis is done: material variance, labour variance, overhead variance.
Cost statements help the senior management (CWM, CME) to monitor the trend of Unit Repair Cost (URC) for locomotives, coaches, wagons.
Workshops must reconcile WMS account balances with general ledger accounts.
4. Specific Cost Control Measures
To ensure costs are controlled, workshops adopt various managerial and operational measures:
4.1 Control of Idle Time
Idle time is categorized into avoidable and unavoidable. Avoidable idle time (due to lack of materials, instructions, poor planning) should be minimized.
Time motion studies, work scheduling, buffer stock of critical spares, proper planning help reduce idle time.
4.2 Overtime Control
Overtime should be granted sparingly and only after approval; otherwise costs escalate.
Overtime must be justifiable in terms of increased output or urgent demand, not routine extension.
4.3 Wastage, Spoilage & Defectives
Fixing permissible limits of wastage, spoilage; differentiating between normal and abnormal wastage.
Investigating causes of abnormal wastage (poor workmanship, poor methods, substandard materials) and fixing responsibilities.
Reducing scrap and rework through quality control and process improvement.
4.4 Tool Utilization and Maintenance
Efficient use of workshop tools, preventive maintenance, avoiding tool breakdowns which cause delays and additional cost.
Ensuring tools are calibrated, replaced in time to avoid defects or reworks.
4.5 Multi-skilling, Inter-Shop Transfers & Outsourcing
Training staff to perform multiple tasks, enabling flexibility and better resource utilization.
If a shop is underutilized, shifting work from overloaded shops (inter-shop transfers).
Outsourcing non-core or heavy cost-intensive tasks (if cost effective) after cost-benefit analysis.
4.6 Productivity Indicators & Benchmarking
Key performance indicators (KPIs) like labour productivity (hours per unit), output per shift, cost per hour, cost per unit, machine utilization factor, etc.
Comparing performance across workshops or with past periods to detect deviation.
5. Roles & Interfaces
5.1 Workshop Accounts Office & Cost Accounts Office
The Workshop Accounts Office keeps daily records of labour, materials, overheads, and maintains WMS accounts.
The Cost Accounts Office (often at Zonal or Divisional HQ) collates cost statements, analyses variances, issues guidelines, and monitors performance.
5.2 Interface with Stores Department
Procurement, issue, stock management of workshop materials must synchronize with costing and budgeting.
Stores must provide correct issue records, avoid misuse, overstocking, pilferage etc.
5.3 Interface with Mechanical / Production Planning
Planning of works, scheduling, resource allocation, and work dispatch must consider cost constraints.
The mechanical / planning department ensures the workshop gets adequate jobs, smooth flow, and avoids idling.
6. Coding, Classification & Budgeting
Expenditure and cost items are coded under Demands, Expenditure Heads, Budgets etc., as per Finance and Rolling Stock codes.
Workshops are funded under sub-heads like Plan Heads 42 (Workshops), 41 (M&P), 21 (Rolling Stock) etc.
Re-appropriation, supplementary grants, revised estimates, final modification are tools to adjust budgets mid-year.
Commitments and anticipated liabilities must be monitored so that available budget is not overshot.
7. Challenges & Best Practices
Challenges
Estimating cost precisely for repair jobs subject to uncertainties (extent of damage, hidden defects).
Allocation of overheads fairly across jobs.
Ensuring discipline in sanction / control so that officials do not routinely overshoot.
Coordination between workshops, stores, planning, accounts.
Old machinery, breakdowns, delays in supply, unexpected items.
Best Practices
Strong system of estimates, vetting and sanction.
Frequent review meetings and variance feedback loops.
Use of ERP / MIS systems to capture real-time cost data.
Benchmarking across workshops.
Continual process improvement, preventive maintenance, lean principles.
Summary — Key Bullet Points for Revision
Workshop is a significant cost centre; control of finances and costs is critical for efficiency.
Financial control involves estimates & sanction, review, vetting, audit, internal checks.
Costing components: Material + Labour + On costs (Shop On, General On, Proforma On).
Costing systems: Job, Process, Batch, and Revised Costing / Unit Repair Cost (URC).
Allocation of overheads requires proper bases (labour hrs, machine hrs) and documentation (route cards, work orders).
Workshops maintain Workshop Manufacturing Suspense (WMS) accounts to accumulate cost before clearance.
Key cost control measures: minimal idle time, rational overtime, controlling wastage, maintenance of tools, multi-skilling, outsourcing.
Role of Workshop Accounts Office and Cost Accounts Office is central in recording, analyzing, reporting.
Budgets and cost heads are aligned with Plan / Demand / Head codes (21, 41, 42 etc.).
Regular cost statements, variance analysis, and feedback loops are essential.
Use of ERP/MIS, benchmarking, and best practices helps in better control and continuous improvement.
(Prepared for Appendix3 Academy)
No comments:
Post a Comment
Note: Only a member of this blog may post a comment.